Weekly pool cleaning in Murrieta, CA.
From $185/mo with chemicals included. Our own team on Inland Empire routes, a set day each week, and a photo report after every visit. No contract.
Pool care for Murrieta backyards.
Murrieta pools range from small plunge pools to large pools under mature trees, so our cleaning price starts with your pool size and how much falls into it. On every visit we skim, brush, vacuum, empty skimmer and pump baskets, and balance chlorine, pH, alkalinity and stabilizer.
If your yard has oaks or pepper trees, expect filters to need cleaning more often than the twice-a-year baseline. We'll tell you when pressure climbs instead of waiting for flow to drop.
We also see a lot of Murrieta pools with older equipment pads tucked into narrow side yards. Gate access, a friendly dog and a pump that's hard to reach are all normal; just tell us when you sign up and we'll plan the visit around it. If your pool sits under oaks, ask about a leaf net in late fall, which can save a lot of skimming.
Neighborhoods on our routes include Greer Ranch, Bear Creek, Los Alamos Hills, Copper Canyon, Spencer's Crossing. Read what good weekly service includes, see all cleaning plans, or request a repair.
What's your monthly price?
Enter your address and answer 3 quick questions. See your price before you give us your number.
Oak country, tannin stains and plateau weather
Yards near Los Alamos Hills and the Santa Rosa Plateau often sit under coast live oaks. Besides the leaves, oaks drop catkins in spring and acorns in fall, and the tannins from wet leaves leave tea-colored stains on plaster if they sit on the floor. Getting them out of the water every week is the simplest way to keep those stains from setting.
Pools higher up toward the plateau can run a little cooler than those on the valley floor near Murrieta Hot Springs Road, so chlorine use there is a little gentler, though leaf loads are heavier.
Gated streets and brand new builds
Greer Ranch and Bear Creek are gated, so service there begins with a working gate code or a guest listing. We set that up once at the start, and the route runs without anyone needing to meet us.
Spencer's Crossing and Copper Canyon have many newer pools. Fresh plaster spends its first months curing, and pH tends to rise during that time. Your builder's startup instructions come first; once they hand the pool off, weekly balancing keeps pH steady while the surface settles in.
Seasonal pool care here.
- SpringOak catkins and pollen clog skimmers and leave a yellow film on the waterline.
- SummerValley floor pools heat up fast, so chlorine demand climbs from June on.
- FallAcorns and leaves fall heavily under oaks; some owners add a leaf net.
- WinterWet leaves are the stain risk now, so weekly removal still matters.
What happens on a weekly visit.
The same steps in the same order, every week.
- Arrive and check the gateWe let ourselves in with the access you set up, latch the gate behind us and note anything off, like a sprinkler head spraying the deck or a dog left out.
- Look before touching anythingA quick read of the water level, clarity and the pump's sound tells us whether this is a routine visit or one that needs extra attention.
- Skim the surfaceFloating leaves, bugs and blossoms come out with a leaf net before they sink and start to break down.
- Brush walls, steps and tileBrushing loosens film and early algae from corners, benches and the waterline so the filter can catch it.
- Vacuum the floorWe vacuum what settled, or check that your automatic cleaner is moving freely and its bag or canister is empty.
- Empty the basketsSkimmer and pump baskets get emptied every week so the pump never strains against a clogged basket.
- Test the waterWe test chlorine, pH, alkalinity and stabilizer each visit, and check calcium and salt on a regular schedule.
- Dose and adjustChemicals go in based on the test, not a fixed recipe, and the water level gets topped off if it has dropped.
- Equipment check and photo reportWe glance at filter pressure, the pump and the plumbing for leaks, then text you a photo of the finished pool with a note on anything we saw.
What we test, and why.
Clear water isn't always balanced water. Slow drift in pH or stabilizer is what leads to cloudy weeks, scale and early plaster wear. Here is what we track, with commonly published targets for a residential plaster pool.
These readings affect each other, so each visit starts with a test and ends with small corrections rather than big doses. A reading that keeps drifting usually points to something else, like a leak or a failing cell, and we'll say so in the visit report.
- Free chlorineThe sanitizer that keeps algae and bacteria in check. Sun and warm water use it up, so a July pool burns through in days what lasts a week in March. The right level depends on stabilizer: more stabilizer means more chlorine is needed.
- pHAbout 7.4 to 7.6. Chlorine works poorly when pH runs high, and salt pools and fresh plaster both push it upward.
- Total alkalinityAbout 80 to 120 ppm. It buffers pH so it doesn't bounce after rain or a chemical dose.
- Cyanuric acid (stabilizer)It shields chlorine from the sun. About 30 to 50 ppm is typical for chlorine pools. It only leaves with drained or splashed water, so tablets can build it up over a summer until chlorine struggles.
- Calcium hardnessRoughly 200 to 400 ppm for plaster. Much of the region's water is hard and evaporation concentrates it, so the usual problem here is too much, seen as white scale at the tile line.
- Salt (salt pools)A salt cell makes chlorine from dissolved salt. We follow the range your cell's manufacturer lists rather than a general number. Low salt or scaled plates cut its output.
What's included.
What each plan covers, and what happens when something breaks.
- PlansCleaning & Maintenance from $185/mo, or Full Equipment & Care from $245/mo with filter cleans, salt cell and equipment care. All chemicals included, no long-term contract, cancel anytime.
- RepairsIf something breaks, our licensed partner contractors handle the repair, and you get their license number in writing before work starts.
Pool cleaning questions in Murrieta.
Didn't find yours? Send us a message or email [email protected]. A real person answers.